User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
151/193
If the NET LED does not light up or if the Remote Server A option in the Status page still shows “Not
Connected”, the configuration was not successful, i.e. the wrong router password was entered or the
device was disconnected during connection.
It is necessary to reset the adapter:
-
Press the Reset button for 10 seconds and release
-
After a few seconds, the LEDs will turn off and READY will start to flash quickly
-
The adapter has now returned to its initial state. At this point, the configuration procedure can
be repeated again.
The adapter can only be reset when the inverter is switched on.
Figure 78
– Reset button on the Wi-Fi adapter