User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
33/193
Support rack installation
:
Procedure
:
Step 1:
Drill holes with a hammer drill (φ 8mm, depth range 60
-65 mm). Reposition and drill the holes, if the
original one has a large deviation.
Step 2:
Install the support rack B on the wall, and fastening expansion bolt.
Step 3:
Adjust the support rack A, make sure the holes are matched between rack A and rack B.
Step 4:
Connect and fix the rack A and rack B with M6*16 screws.
Figure 14 –Schematic diagram of wall fixing installation