10-22
IM 253710-01E
10.7 Setting the Harmonic Orders under Analysis
This section applies when the measurement mode is set to harmonic
measurement.
Keys
• The
mark indicates the keys that are used for the operation.
• To exit the menu during operation, press the ESC key.
CONFIGURATION
ELEMENTS
VOLTAGE
CURRENT
FILTER
1
FILTER
FILTER
FILTER
2
3
4
RES
ET SELECT
CH
8
CH
6
CH
4
CH
2
CH
7
CH
5
CH
3
CH
1
OBSERVATION TIME
TRIG’ D
ACQ
REMOTE
MENU
SHIFT
NULL
CAL
COPY
LOCAL
HELP
MISC
FILE
ZOOM
CURSOR
MATH
DISPLAY
SETUP INPUT MEASURE TRIGGER
ABORT
E S C
SINGLE
START
START/STOP
Procedure
Set the measurement mode to harmonic measurement. For the procedures, see
section 5.1, “Selecting the Measurement Mode.”
1.
Press the SETUP key to display the Setup menu. Confirm that [Mode] is set to
[Harmonics].
2.
Press the MEASURE key to display the Measure setting menu.
3.
Press the [Mode] soft key to select [ON].
4.
Press the [Next 1/2] soft key to display the [Next 2/2] menu.
Selecting the minimum harmonic order under analysis
5.
Press the [Min Order] soft key to select [0] or [1].
Selecting the maximum harmonic order under analysis
6.
Turn the jog shuttle to set the maximum harmonic order to be analyzed.