manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, Руководство пользователя, Страница: 94 / 190

Поделиться
Скачать
YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 94

4-10

IM DL850-03EN

4.4  Synchronizing the Clock

This section explains how to set the DL850/DL850V clock, which is used to generate timestamps for 
measured data and files. The DL850/DL850V is factory shipped with a set date and time. You must set 
the clock before you start measurements.

UTILITY System Config Menu

Press 

UTILITY

, the 

System Config

 soft key, and then the 

Date/Time

 soft key to display the following 

screen.

 

Turns the display of the date 

and time on and off
Set the display format.

Set the date and time.

Set the time difference from 

Greenwich Mean Time.

Setting the Display Format (Format)

You can display the date in one of the following formats.
  2008/09/30 (year/numeric month/day)
  30/09/2008 (day/numeric month/year)
  30-Sep-08 (day-English abbreviation of the month-last two digits of the year)
  30 Sep 2008 (day month (English abbreviation) year)

Setting the Time Difference from Greenwich Mean Time (Time Diff. 

GMT)

Set the time difference between the region where you are using the DL850/DL850V and Greenwich 
Mean Time.
  Selectable range: -12 hours 00 minutes to 13 hours 00 minutes
For example, Japan standard time is ahead of GMT by 9 hours. In this case, set Time Hour to 9 and 
Minute to 00.

Checking the Standard Time

  Using one of the methods below, check the standard time of the region where you are using the 

DL850/DL850V.
•  Check the Date, Time, Language, Regional Options on your PC.
•  Check the standard time at the following URL:http://www.worldtimeserver.com/

Note

•  The DL850/DL850V does not support Daylight Saving Time. To set the time to Daylight Saving Time, reset 

the time difference from Greenwich Mean Time.

•  Date and time settings are backed up using an internal lithium battery. They are retained even if the power 

is turned off.

•  The DL850/DL850V has leap-year information.

Содержание DL850 ScopeCorder































































































































































































Отзывы:

Нет отзывов