manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, Руководство пользователя, Страница: 126 / 190

Поделиться
Скачать
YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 126

6-18

IM DL850-03EN

Item

Specifications

701270:

100 kS/s, envelope mode, 500 μSTR, gauge factor: 2.0, no input filter

701955 bridge voltage: 2 V

701956 bridge voltage: 10 V

701271:

100 kS/s, envelope mode, 500 μSTR, gauge factor: 2.0, no input filter

701957 bridge voltage: 2 V

701958 bridge voltage: 10 V

701275:

100 kS/s, envelope mode, 50 mV/div, no input filter, with the tip of the probe 

(700929 (10:1)) shorted

701280:

25 kS/s, envelope mode, Frequency, no input filter, with the tip of the probe 

shorted

720210:

100 M/s, envelope mode, 0.1 V/div, no input filter, with the tip of the probe 

(700929 (10:1)) shorted

720220:

12.5 kS/s, envelope mode, 0.2 V/div, no input filter, with the end of the cable 

shorted

720221:

25 kS/s, envelope mode, 1 mV/div, data update period = 100 ms with the end 

of the cable shorted when you are using the 701953

720230:

Logic probes 700986, 700987, 702911, and 702912, with the tips of the logic 

probes shorted

720240:

Bit rate: 1 Msps, one shot operation

720241:

Bit rate: 19.2 kbps, external signal input

Test items

1. Electrostatic discharge

Air discharge: ±8 kV. Contact discharge: ±4 kV. Criteria B.

2. Radiated immunity

80 M to 1 GHz, 10 V/m, 1.4 G to 2 GHz, 3 V/m, 2 GHz to 4.0 GHz, 3 V/m, criteria A

3. Conducted immunity

3 V, criteria A

4. Fast transient/burst

Power line: ±2 kV. Signal line: ±1 kV, criteria B

5. Power frequency magnetic field

Omitted, because the device does not exert considerable influence on the magnetic field

6. Surge immunity

±1 kV between lines, ±2 kV common, criteria B

7. Voltage dip and interruption

1 cycle, 100%, criteria B

Other tests, criteria C

Definitions of criteria

Criteria A:  During testing, “influence in the immunity environment” described above is met.

Criteria B:   The instrument continues to function and is controllable throughout testing. The 

instrument does not change operation modes, and data changes do not persist.

Criteria C:   Temporary losses of functionality (such as measurement stopping, etc.) are 

recovered from through the intervention of the operator.

1   The typical value is a representative or standard value. It is not strictly warranted.

2  If  the  701260  module  is  inserted  into  the  DL850/DL850V,  it  will  not  comply  with  safety  standard  EN61010-1:2010  or 

EN61010-2-030:2010.

3   The  overvoltage  category  (installation  category)  is  a  value  used  to  define  the  transient  overvoltage  condition  and  includes 

the  rated  impulse  withstand  voltage.  Category  I  applies  to  electric  equipment  whose  power  is  supplied  from  a  circuit  that 

incorporates withstand voltage control. Category II applies to electrical equipment that is powered through a fixed installation, 

such as a switchboard.

4  The measurement category of this instrument’s signal input terminals varies depending on the modules that are installed. Use 

the instrument within the scope of the measurement category that corresponds to the module specifications. Do not use the 

instrument outside the scope of the measurement category that corresponds to the module specifications. The scope of each 

measurement category is as follows.

  Measurement category Other (O) applies to measurement of circuits that are not directly connected to a main power supply. 

This  category  applies  to  measurement  of  secondary  electric  circuits  in  equipment  across  a  transformer.  If  the  module 

specifications fall under measurement category O, the estimated transient voltage that may appear at the signal input terminals 

is 1500 V.

  Measurement category II applies to measurement of circuits, such as household electric appliances and portable electric tools, 

that are connected to low-voltage installations.

  Measurement category III applies to measurement of facility circuits, such as distribution boards and circuit breakers.

  Measurement category IV applies to measurement of power source circuits, such as entrance cables to buildings and cable 

systems, for low-voltage installations.

5   Pollution Degree applies to the degree of adhesion of a solid, liquid, or gas which deteriorates withstand voltage or surface 

resistivity. Pollution degree 2 applies to normal indoor atmospheres (with only non-conductive pollution).

6  TDK: ZCAT2035-0930A, YOKOGAWA part number: A1190MN

7  TDK: ZCAT3035-1330, YOKOGAWA part number: A1179MN

8  TDK: ZCAT1325-0530A, YOKOGAWA part number: A1181MN

6.12  General Specifications

Содержание DL850 ScopeCorder































































































































































































Отзывы:

Нет отзывов