manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, Руководство пользователя, Страница: 13 / 190

Поделиться
Скачать
YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 13

xi

IM DL850-03EN

Failure to comply with the precautions below could lead to injury 

or death or damage to the instrument.

 

WARNING

Use the Instrument Only for Its Intended Purpose

This instrument is a waveform measuring device that monitors and measures electrical 
signals. Do not use this instrument for anything other than as a waveform measuring device.

Check the Physical Appearance

Do not use the instrument if there is a problem with its physical appearance.

Use the Correct Power Supply

Before connecting the power cord, ensure that the power supply voltage matches the rated 
supply voltage of the DL850/DL850V and that it is within the maximum rated voltage of the 
provided power cord.

Use the Correct Power Cord and Plug

To prevent the possibility of electric shock or fire, be sure to use the power cord supplied by 
YOKOGAWA. The main power plug must be plugged into an outlet with a protective earth 
terminal. Do not invalidate this protection by using an extension cord without protective earth 
grounding. Additionally, do not use the power cord supplied with this instrument with another 
instrument.

Connect the Protective Grounding Terminal

Make sure to connect the protective earth to prevent electric shock before turning on the 
power. The power cord that comes with the instrument is a three-prong type power cord. 
Connect the power cord to a properly grounded three-prong outlet.

Do Not Impair the Protective Grounding

Never cut off the internal or external protective earth wire or disconnect the wiring of the 
protective earth terminal. Doing so may result in electric shock or damage to the instrument.

Do Not Operate with Defective Protective Grounding or Fuse

Do not operate the instrument if the protective earth or fuse might be defective. Check the 
grounding and the fuse before operating the instrument.

Do Not Operate in an Explosive Atmosphere

Do not operate the instrument in the presence of flammable gasses or vapors. Doing so is 
extremely dangerous.

Do Not Remove the Covers or Disassemble or Alter the Instrument

Only qualified YOKOGAWA personnel may remove the covers and disassemble or alter the 
instrument. The inside of the instrument is dangerous because parts of it have high voltages.

Ground the Instrument before Making External Connections

Securely connect the protective grounding before connecting to the item under measurement 
or to an external control unit. Before touching a circuit, turn off its power and check that it has 
no voltage.

Precautions to Be Taken When Using the DC Power Supply (When using a DL850V DC 
power supply model)

•  Make sure to perform protective earth grounding to prevent electric shock.
•  Connect the DC power cord after checking that the power switch of the instrument is turned 

OFF. If you connect the power cord with the power switch turned ON, sparks may be 
emitted and can lead to fire.

Safety Precautions

Содержание DL850 ScopeCorder































































































































































































Отзывы:

Нет отзывов