manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, Руководство пользователя, Страница: 53 / 190

Поделиться
Скачать
YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 53

Turning the Power Switch On and Off

Before Turning On the Power, Check That:

•  The instrument is installed properly (see section 3.2, “Installing the Instrument”).
•  The power cord is connected properly (see page 3-9).

Turning the Power Switch On and Off

Flip the power switch on the left side panel to ON (|) to turn the instrument on, and to OFF (○) to turn 

the instrument off.

 

Turning ON/OFF the DC Power (/DC)

Before Turning On the Power, Check That:

•  The instrument is installed properly (see section 3.2, “Installing the Instrument”).
•  The power cord is connected properly (see page 3-9).

Turning the Power Switch On and Off

Flip the power switch on the left side panel to ON (|) to turn the instrument on, and to OFF (○) to turn 

the instrument off.

Note

If AC power is supplied and the main power switch to the AC power is ON, AC power is used.

Status Display of the DC Power Supply

The power supply status is indicated on the LED on the left side panel.
AC LED

LED Status

Description

Illuminated in green

Operating on AC power

DC LED

LED Status

Description

Illuminated in green

Operating on DC power (AC power is not connected)

Operating on AC power, and the DC supply voltage is within the operating range (10 

to 18 VDC)

Illuminated in red

Operating on DC power, and the DC supply voltage is outside the operating range

Illuminated in orange

DC power is turning ON/OFF repeatedly (internal protection circuit is tripping)

Power is not supplied in this condition. This status is automatically cleared after 10 

to 20 seconds.

Illuminated in red

Internal circuit operation failure. Repair is necessary.

Off

Operating on AC power, and the DC supply voltage is within the operating range (10 

to 18 VDC) or the DC power is not supplied

3.4  Connecting to a Power Supply and Turning the Power Switch On and Off

3-12

IM DL850-03EN

Содержание DL850 ScopeCorder































































































































































































Отзывы:

Нет отзывов