manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, Руководство пользователя, Страница: 36 / 190

Поделиться
Скачать
YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 36

2-6

IM DL850-03EN

Trigger Source

Trigger source

 refers to the signal that is used to check the specified trigger conditions. You can set 

the trigger source to an analog signal, logic signal, realtime math signal, time, external signal, or power 
line signal. Select the appropriate trigger source for the trigger type.

Trigger Level

Trigger level

 refers to the signal level used as a reference for detecting a signal’s rising and falling 

edges or high and low states. With simple triggers such as the edge trigger, the DL850/DL850V 
triggers when the trigger source level passes through the specified trigger level. The range and 
resolutions that you can use to set the trigger level vary depending on the type of signal being 
measured.

Trigger Slope

Slope

 refers to the movement of the signal from a low level to a high level (rising edge) or from a high 

level to a low level (falling edge). When a slope is used as one of the trigger conditions, it is called a 
trigger slope.

Trigger Hysteresis

When the trigger source is an analog signal, you can set a width (hysteresis) to the trigger level so that 
the DL850/DL850V does not detect edges when the signal level changes within the specified width.
You can set the hysteresis around the trigger level for each type of measured signal.

Trigger Hold-off

The trigger hold-off feature temporarily stops the detection of the next trigger once a trigger has 
occurred. This feature is useful in cases when you want to change the waveform acquisition interval, 
such as when you are observing a PCM (pulse code modulation) code or other pulse train signal or 
when you are using the history feature.

Trigger Position

When you move the trigger position, the ratio of the displayed data before the trigger point (pre-data) 
to the data after the trigger point (post-data) changes. When the trigger delay is 0 s, the trigger point 
and trigger positions coincide.

Trigger Delay

The DL850/DL850V normally displays waveforms before and after the trigger point. You can set a 
trigger delay to display waveforms at a specified amount of time after the trigger occurrence.

2.2  Triggering

Содержание DL850 ScopeCorder































































































































































































Отзывы:

Нет отзывов