YOKOGAWA AQ1210D, Руководство пользователя

Страница: 81 / 290

3-9
IM AQ1210-01EN
Performing Real-time Measurement
11
22
33
44
55
66
77
88
99
10 10
11 11
App App
Index Index
Explanation
Cable Installation Completion Notification
Before you check whether the work is complete, move the cursor slightly after the extension work
point or before the work completion point on the optical fiber cable, and turn on the work completion
notification. When the fiber end detection position (the event) during real-time measurement is the
same as the cursor position (CheckPoint), the instrument gives a notification (message indication and
alarm sound) that the cable installation is complete.
Construction start
position
Distance
Level
Extension work point
(splice, connection, etc.)
Work completion point
Work completion notification
cursor position
50 km 100 km
(Event)
Completion notification
cursor position during
optical fiber cable
extension
CheckPoint CheckPoint
Notification
Turns on or off the work completion notice feature.
OFF: The work completion notice feature is disabled.
ON: The work completion notice feature is enabled.
Notification (Message)
OFF: Work completion is not notified with a message.
ON: Work completion is notified with a message.
Notification (Alarm)
OFF: Work completion is not notified with an alarm sound.
ON: Work completion is notified with an alarm sound.
Confirmation
No Check: A confirmation message is not displayed on the screen even if you tap the
Completion Check soft key.
Check only once: A confirmation message is displayed on the screen once when you tap the
Completion Check soft key the first time.
Check everytime: A confirmation message is displayed on the screen every time you tap the
Completion Check soft key.
3.3 Cable Installation Completion Notification