YOKOGAWA AQ1210D Скачать руководство пользователя страница 190 | Manualshive

Страница: 190 / 290

YOKOGAWA AQ1210D Скачать руководство пользователя страница 190

8-16

IM AQ1210-01EN

Performing Averaged Measurements

5.

Tap the core number you want to perform averaged measurement on. A menu appears for

executing a measurement.

OTDR feature

(average)

Example of measuring core number 44

6.

Tap the

Average

menu to start an averaged measurement.

The measured waveform is displayed on the screen, and while the measurement is in progress, a laser
emitting mark is displayed at the top of the screen.

Laser on indication

The OTDR port emitting light

Averaged measurement in progress indication

Core number being

measured

OTDR waveform

screen

Cannot be controlled on the OTDR waveform screen of multi-fiber measurement. When event

search is set to on in the setup measurement (Measure) conditions, the analysis results are

displayed when the measurement is complete.

Note

• If Wavelength on the multi-fiber measurement screen is set to “All,” measurement is executed using

multiple wavelengths for each core.

• If you enter the label characters in the label setting of the project setup screen, the same label characters

can be entered at once for all cores.

• You can also execute an averaged measurement using the AVG key.

• When Auto Save is Set to ON in the Measurement (Measure) Conditions of Setup

When measurement is complete, the measured results are automatically saved. The screen

returns automatically to the multi-fiber measurement screen, and pass/fail judgment indications
appear in the core number cells whose measurement results have been saved.

8.2 Measuring a Multi-Core Optical Fiber Cable (Multi-Fiber Project)

«
...
188
189
190
191
192
...
»

Содержание AQ1210D



































































































































































































































































































Отзывы:

Нет отзывов