YOKOGAWA AQ1210D Скачать руководство пользователя страница 113

Страница: 113 / 290

6-2

IM AQ1210-01EN

Displaying the Cursors

Tap the data display screen. A cursor appears at the tapped position.

A cursor appears at the

tapped position.

Cursor and marker operation screen

If you do not use markers or cursors for about 8 seconds, the screen will close automatically.

Closes the window

Clears markers and cursors

Distance from the start point to the

cursor position on the waveform and

the level at the cursor position

Note

When you turn the rotary knob to the right, a cursor appears at the left edge of the data display screen.

Moving the Cursor

Tap the position on the data display screen that you want to move the cursor to. The cursor

moves to the position that you tapped. You can also move the cursor by dragging the cursor on

the data display screen or by turning the rotary knob. By pressing the rotary knob, you can set

the amount the cursor moves when the rotary knob is turned. For details, see "Explanation" in

this section.

The cursor moves to the position that you tap.

Drag

Moves the cursor

6.1 Operating Cursors and Markers

Содержание AQ1210D



































































































































































































































































































Результаты поиска

Содержание AQ1210D

Отзывы:

YOKOGAWA AQ1210D, Руководство пользователя, Страница: 113 / 290

Результаты поиска

Содержание AQ1210D

Отзывы: