manualshive.com logo in svg

YOKOGAWA AQ1210D, Руководство пользователя, Страница: 188 / 290

Поделиться
Скачать
YOKOGAWA AQ1210D Скачать руководство пользователя страница 188

8-14

IM AQ1210-01EN

Analysis (Analysis) Conditions

4.

  Tap the 

ANALYSIS

 tab to display the following screen.

 

  

Set the launch fiber (OFF, ON).

See page 2-8.

Set the end of fiber (3dB to 70dB).

Set the splice loss 

(0.01dB to 9.99dB).

Set the IOR/backscatter level.

See page 2-10.

Executes initialization

Press to reset the analysis settings 

to their factory defaults.

ANALYSIS tab

Set macro bending (OFF, ON).

Set the pass/fail judgment (OFF, ON).

See page 2-8.

Set the approximation method 

(event; TPA, LSA).

Set the splitter loss (1dB to 20dB).

Set the return loss (20dB to 70dB).

Set the approximation method 

(marker; TPA, LSA).

Note

For details on the setup screen that appears when you select a setting and the descriptions of the settings, 
see section 2.2.

8.2  Measuring a Multi-Core Optical Fiber Cable (Multi-Fiber Project)

Содержание AQ1210D



































































































































































































































































































Отзывы:

Нет отзывов