manualshive.com logo in svg

YOKOGAWA AQ1210D, Руководство пользователя, Страница: 131 / 290

Поделиться
Скачать
YOKOGAWA AQ1210D Скачать руководство пользователя страница 131

6-20

IM AQ1210-01EN

6.4  Analyzing Sections

Procedure

Waveform Data Display

1.

 Press 

MENU

 to display the MENU screen.

For details on the MENU screen, see the Getting Started Guide, IM AQ1210-02EN.

2.

 Tap 

OTDR

 to display the OTDR screen.

•  Switching the Display between TRACE Mode and MAP Mode

3.

  Tap the 

TRACE

/

MAP

 button to set the data display screen to TRACE mode.

When the data display screen is in TRACE mode, the button is MAP.

 

  

4.

  Perform a measurement or load a file to display a waveform on the screen.

When performing an averaged measurement, wait for the measurement to complete. When loading a 
waveform data file, use an SOR file that has been measured and saved with the instrument.

Soft Key Menu (section analysis)

5.

  Tap the soft key menu display button.

A soft key menu that can be used when real-time measurement or averaged measurement is not in 
progress is displayed.

Soft key menu

Содержание AQ1210D



































































































































































































































































































Отзывы:

Нет отзывов