manualshive.com logo in svg

YOKOGAWA AQ1210D, Руководство пользователя, Страница: 58 / 290

Поделиться
Скачать
YOKOGAWA AQ1210D Скачать руководство пользователя страница 58

2-20

IM AQ1210-01EN

Marker Information

You can display the distance from the measurement reference point to each marker on the waveform 
display area.
  OFF: Marker information is not displayed.
  ON:  Marker information is displayed.

 

Marker information

Reflection Display (when the suffix code is -HJ)

You can set the reflection display at the calculation result display area of measurement data to either 
of the following settings.
  Return loss:     The ratio of the incident optical power level and the reflected optical power level is 

displayed.

  Reflection level:  The reflected optical power level is displayed.

 

Reflection display

Cursor dB Value

You can display not only the distance at the cursor position, but also the dB value.
  OFF: Only the distance at the cursor position is displayed.
  ON:  he distance and the dB value at the cursor position are displayed.

 

dB value at the cursor position

2.3  Display (OTDR) Conditions

Содержание AQ1210D



































































































































































































































































































Отзывы:

Нет отзывов