manualshive.com logo in svg

YOKOGAWA AQ1210D, Руководство пользователя, Страница: 99 / 290

Поделиться
Скачать
YOKOGAWA AQ1210D Скачать руководство пользователя страница 99

5-3

IM AQ1210-01EN

Analyzing Events

11

22

33

44

55

66

77

88

99

10

10

11

11

App

App

Index

Index

Executing an Event Analysis

5.

  Tap the 

Event Analysis

 soft key. Event analysis is performed, and the event results are 

displayed on the waveform data. For details on the event analysis results, see “Displaying 

Event Analysis Results” On page 5-1.

Note

If you display waveform data using the following methods, you need to manually execute event analysis.
•  When a real-time measurement is performed
•  When waveform data (without event analysis information) is loaded from a USB memory device or 

internal memory Event analysis information is not included in waveform data of real-time measurement or 
waveform data of averaged measurement that is aborted in the middle of a measurement.

 

  

Switches the display of the event analysis results 

(Summary, List, Detail)!!!

This is the same function as 

the tab used to switch to display of the analysis results.

Edit or fix events.

2-point markers

See page 5-9.

Selects the rotary knob function (Cursor, Event)

Editing or Fixing Events

  There may be cases where, because the backscattering light level is too small at a reflection point 

in an optical fiber cable, the reflection cannot be detected as an event, or there may be cases where 
noise is detected as an event. In such cases, you can adjust the events by editing them as follows:
•  Insert events
•  Delete events
•  Edit event markers
•  Fix event positions

6.

  Tap the 

Event Edit/Fix

 soft key. An event edit soft key menu appears.

 

  

Edit event markers.

See page 5-6.

You can delete events 

when the

 Rotary Knob 

soft key is set to Event.

You can insert 

events when the

 

Rotary Knob 

soft key is set to 

Cursor.

Deletes an event

Set the distance 

reference.

See page 6-6.

Fixing Events

See page 5-8.

Inserts an event

5.1  Analyzing in TRACE Mode

Содержание AQ1210D



































































































































































































































































































Отзывы:

Нет отзывов