YOKOGAWA 2560A Скачать руководство пользователя страница 111

Страница: 111 / 199

11-1

IM 2560A-01EN

USB Interface

App

Index

11.1 USB Interface Features and Specifications

USB Interface Features

Reception Feature

• With the exception of turning the power switch on and off, you can use the reception feature to

specify the same settings that you specify by using the front panel keys.

• The 2560A can receive panel setup parameters, error codes, and other output requests from a

controller.

• The 2560A can receive status report commands.

Transmission Feature

The 2560A can transmit panel setup parameters, status byte, error codes that occur, and so on.

USB Interface Specifications

Item

Specifications

Number of ports

Connector type

Type B connector (receptacle)

Electrical and mechanical

Complies with USB Rev. 2.0

Supported transfer modes

HS (High Speed; 480 Mbps) and FS (Full Speed; 12 Mbps)

Supported protocols

USBTMC-USB488(USB Test and Measurement Class Ver.1.0)

Switching between Remote and Local Modes

When Switching from Local to Remote Mode

The 2560A switches to remote mode when it is in local mode and receives a

:COMMunicate:REMote ON

command from the PC.

• The REMOTE indicator turns on.
• All dials and switches are disabled except for the flipping of the

OUTPUT

switch to the LOCAL

side to change the 2560A to local mode.

• Settings entered in local mode are retained even when the 2560A switches to remote mode.

When Switching from Remote to Local Mode

When the 2560A is in remote mode and you flip the

OUTPUT

switch to the LOCAL side,

the 2560A switches to local mode. However, this does not work if the 2560A has received a

:COMMunicate:LOCKout ON

command from the PC. The 2560A switches to local mode when it

receives a

:COMMunicate:REMote OFF

command from the PC, regardless of the local lockout

state.
•  The REMOTE indicator turns off.
•  Dials and switches can be used.
•  Settings entered in remote mode are retained even when the 2560A switches to local mode.

Note

You cannot use the USB interface simultaneously with other interfaces (GP-IB or Ethernet).

Chapter 11 USB Interface

Содержание 2560A








































































































































































































Результаты поиска

Содержание 2560A

Отзывы:

Похожие инструкции для 2560A

Бренды по названию

Популярные бренды

YOKOGAWA 2560A, Руководство пользователя

Результаты поиска

Содержание 2560A

Отзывы:

Похожие инструкции для 2560A

Бренды по названию

Популярные бренды