8-4
IM 2560A-01EN
Explanation
You can select whether to sound beeps that indicate the 2560A operating status. You cannot change
the volume.
You can turn the beep sound on or off for the following notifications.
• When a voltage greater than or equal to +150 V or less than or equal to –150 V is to be output,
regardless of the output on/off state
• When a sweep operation is held
You cannot turn off the beep sound for the following notifications.
• When the cooling fan stops (error code: E.901, E.907)
• When an abnormal temperature is detected (error code: E.902, E.903)
• When an internal power supply error is detected (error code: E.904, E.905, E.908)
• When an error is detected during a self-test executed at power-on or by some other operation (error
codes: E.911 to E950) However, you can turn off the beep sound for these errors by performing the
procedure below.
• Turn the power on
Control a front-panel dial or switch
• Execute a self-test using other controls
Flip the PRESET switch down
8.2
Turning the Beep Sound On and Off
