3-17
IM 2560A-01EN
Preparation
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
Wiring a Thermograph
The fastening screws of the low voltage-current output terminals (OUTPUT 1) are M6. Wind the
thermocouple wire or the RTD lead wire around the output terminal screw, and then tighten the
terminal knob firmly with your hand. The terminal or knob may break if you apply excessive torque. For
wiring examples, see also appendixes 3 and 4.
Wiring Example
−
(B)
+(A)
Thermograph
2560A
Low voltage-current
output terminals
Note
If the output terminal temperature changes as a result of making contact when wiring thermocouples,
compensating lead wires, and the like; making contact when connecting external RJ sensors; and due to
ambient air movement, errors exceeding the accuracy specifications may occur. In such situations, wait until
the output stabilizes.
3.6 Connecting Wires
