9.5 Estimating the Moment of Inertia
9.5.4 Operating Procedure
9-22
15.
Click the
Writing Results
Button.
Identified Moment of Inertia Ratio
Box
The moment of inertia ratio that was found with operation and measurements is dis-
played here.
Writing Results
Button
If you click this button, Pn103 (Moment of Inertia Ratio) in the SERVOPACK is set to the
value that is displayed for the identified moment of inertia ratio.
Pn103: Moment of Inertia Ratio
Box
The value that is set for the parameter is displayed here.
After you click the
Writing Results
Button, the value that was found with operation and
measurements will be displayed as the new setting.
Back
Button
This button is disabled.
Cancel
Button
This button will return you to the Tuning Dialog Box.
16.
Confirm that the
Identified Moment of Inertia Ratio
Box and the
Pn103: Moment of
Inertia Ratio
Box show the same value and then click the
Finish
Button.
17.
Click the
OK
Button.
18.
Click the
Execute
Button.
If the setting of the moment of inertia ratio (Pn103) was changed, the new value will be saved and the
Tuning Dialog Box will be displayed again.
This concludes the procedure to estimate the moment of inertia ratio.