Faxing
WorkCentre 7500 Series Multifunction Printer 141
User Guide
Note:
You must address the fax before using this feature.
To build a fax job:
1.
Touch the
Job Assembly
tab, then touch
Build Job
>
On
.
2.
Select or clear the
Display this window between segments
check box.
3.
Program and scan the first segment:
a.
Load the originals for the first segment.
b.
Select the required settings, such as layout adjustments, image quality, and so on.
c.
Press the green
Start
button on the control panel.
4.
Program and scan additional segments:
a.
Load the originals for the next segment.
b.
When the Build Job screen appears, touch
Program Next Segment
.
c.
Using the appropriate tabs, select the required settings.
d.
Press the green
Start
button to scan the originals for that segment.
5.
Repeat the previous step for each remaining segment.
Note:
At any time, you can touch
Delete Last Segment
or
Delete All Segments
to modify the job.
6.
When all of the segments have been programmed and scanned, touch
Submit the Job
. The Job
Progress screen appears, and the individual segments are faxed as a single job.
7.
On the Job Progress screen, touch
Job Details
to view a summary of the job.
Note:
If necessary, touch
Delete
>
Delete Job
to cancel the job.
