Faxing
136
WorkCentre 7500 Series Multifunction Printer
User Guide
Setting Up Book Faxing
You can determine the method used for scanning images in a book.
To select Book Faxing:
1.
Touch the
Layout Adjustment
tab, then touch
Book Faxing
.
2.
Touch one of the following options:
•
Off
is the default setting.
•
Both Pages
scans both pages of the book. If necessary, touch the
Binding Edge Erase
arrows
to set the amount to erase from the binding edge.
•
Left Page Only
scans the left page of the book. If necessary, touch the
Binding Edge Erase
arrows to set the amount to erase from the binding edge.
•
Right Page Only
scans the right page of the book. If necessary, touch the
Binding Edge Erase
arrows to set the amount to erase from the binding edge.
3.
Touch
Save
.
Requesting a Confirmation Report
You can request a report that confirms when your faxes are sent or received. The report contains
information on timeouts, busy signals, and retry failures.
To set up a Confirmation Report:
1.
Touch the
Fax Options
tab, then touch
Confirmation Report
.
2.
Touch one of the following options:
•
Always Print
generates a report for all fax jobs.
•
Print on Error Only
only generates a report for fax jobs that fail to send.
3.
Touch
Save
.
Selecting the Starting Rate
Select the highest starting rate unless the destination for the fax you are sending has special
requirements.
To select the transmission speed for a fax:
1.
Touch the
Fax Options
tab, then touch
Starting Rate
.
2.
Touch one of the following options:
•
Super G3 (33.6 Kbps)
•
G3 (14.4 Kbps)
•
Forced (4800 bps)
3.
Touch
Save
.
Sending a Delayed Fax
You can set a time in the future for the printer to send your fax job. The time delay can be from 15
minutes to 24 hours from the current time.
