Xerox Phaser 3635MFP/S, Руководство пользователя

Страница: 92 / 228

5 Network Scanning
86 Xerox Phaser 3635MFP User Guide
Scan Procedure
This section describes the basic procedure for scanning. Follow the steps
below.
Load the Documents – page 86
Select Network Scanning – page 87
Select Network Scanning Template – page 88
Change Feature Settings – page 88
Start the Network Scanning Job – page 89
Job Status Screen – page 89
Stop the Network Scanning Job – page 90
NOTE:
If an authentication feature is enabled, you may need an account
before using the device. To get an account, or for more information, contact
the System Administrator.
1 Load the Documents
You can load the documents to be scanned either on the Document Glass or
through the Document Feeder.
Document Feeder:
The following steps explain how to load documents using the document
feeder:
1.
Before loading the documents into the document feeder, ensure they are
in good condition and remove all staples and paper clips.
2.
Insert the documents neatly into
the document feeder, face up. The
first page should be on top with
the headings towards the left of
the machine.
3.
Place the stack in the middle of
the guides aligning the left edge
with the document feeder tray, and
position the guides to just touch
the edge of the documents.