Xerox Nuvera 288 Скачать руководство пользователя

Страница: 175 / 256

Finisher Specifications

file:///C|/Documents%20and%20Settings/Miz%20B/My%...GTA/Nuvera%209.0%20UGTA_FINAL/English/spec_40.htm (2 of 4)8/13/2008 4:44:15 PM

The MFF Professional Model

MFF Stapling

Portrait, Landscape and Dual stapling is available for all media types, except Tabs and Transparencies. Stapling is offered for mixed

sized sets if the length of the feed edge is the same size for all sheets.

For details and specifications on the staplers, see

Stapler Specifications

MFF Capacities

The Xerox Nuvera Multifunction Finisher (MFF) adds the finishing touches to your job by collating and stapling your output. The MFF

Professional can be used to make folded and stapled booklets and various folding options; Folded-Only Booklets, Tri-Fold C-

Configuration and Z-Configuration folded documents.

Top Tray

Output to the Top Tray is delivered with Side-1 down and sets are not offset. The Top Tray can hold up to 250 sheets of 20 lb. (75-80

gsm) or equivalent paper. It can be set as a destination tray for non-stapled jobs. Copies that are less than 6.7 inches long in feed

direction or 8 inches in the cross-feed direction will go to the Top Tray rather than the Main Tray. The Top Tray also receives sheets

that are purged from the system when using the Main Tray or the Bottom Tray.

Main Tray

The Main Tray is the output tray for receiving compiled stapled and unstapled sets as well as single sheets. Output is delivered with

Side-1 down and sets are offset. It can staple up to 100 sheets of 8.5 x 11 inch or A4 LEF, and 8.5 x 14 inch or B4 SEF of 20 lb. (75-80

gsm). It also can staple up to 50 sheets for paper sizes over 8.5 x 14 inch or B4 SEF of 20 lb. (75-80 gsm). Portrait, landscape, and

dual position stapling are available.

"Stack Limit" allows you to set the Main Tray to the size of the stack from 200 to 2500 sheets. Once the set stack limit is achieved, the

system will cycle down and display an Empty Main Tray message. The default setting is 2500 sheets.

Bottom (Booklet) Tray

The Bottom Tray is the output tray for receiving compiled stapled and unstapled booklets. It can receive up to 20 booklets of 15 sheets

maximum of 8.5 x 11 inch or A4, 8.5 x 14 inch or Foolscap, and 11 x 17 inch or A3 20 lb. (75-80 gsm) or equivalent thickness with the

Bottom Tray Stop in the up position. It also can receive Folded-Only Booklet up to 5 folded sheets per set of 8.5 x 11 inch or A4, 8.5 x

14 inch or Foolscap, and 11 x 17 inch or A3 or equivalent thickness with the Bottom Tray Stop in the up position. It can receive Tri-Fold

C-Configuration and Tri-Fold Z-Configuration of single sheets only of 8.5 x 11 inch or A4 SEF.

●

2,250 sheet total capacity of 20 lb. (75-80 gsm) paper or equivalent

●

250 sheet Top Tray

●

2,000 sheet Main Tray

●

1 and 2 Position Stapling in Main Tray

●

100 sheet staple capacity, sizes 8.5 x 14 inch or B4 and smaller.

Contact Xerox

to order this consumable part.

●

50 sheet staple capacity paper sizes over 8.5 x 14 inch or B4.

Contact Xerox

to order this consumable part.

Stapler Capacity

Up to 100 sheets of 20 lb bond (75 gsm) (one or two staples) or

equivalent substrates (reduced stapled sheet capabilities can result

based on substrate properties (i. e. thickness, density, material, coating,

etc.)

Includes two internal pass-through 100 sheet upside down staplers. The

stapler devices have the ability to portrait, landscape or dual staple all

supported paper sizes. Finished sets can be stacked internally to the

lower stacker tray.

If either of the Staplers runs out of staples see

Replacing Staples

or if it

jams see

Clearing Staple Jams

An alternate Staple Cartridge for up to 30 sheets of 20lb is available. (75-

80 gsm) paper capacity.

Contact Xerox

for information on ordering refills.

Each Stapler Cartridge holds 5000 staples.

Contact Xerox

for information

on ordering refills.

Same

Paper Size Range

process direction

cross process direction

8.26 in to 18.5 in (210 mm to 457 mm)

8.26 in to 12 in (210 mm to 305 mm)

Same

Stock Weight Range

uncoated:

coated:

16 lb bond to 113 lb index (56 to 220 gsm)

No coated stock

Same

175 of 256

Содержание Nuvera 288

































































































































































































































































Результаты поиска

Содержание Nuvera 288

Отзывы:

Похожие инструкции для Nuvera 288

Бренды по названию

Популярные бренды

Xerox Nuvera 288, Руководство пользователя и учебное пособие

Результаты поиска

Содержание Nuvera 288

Отзывы:

Похожие инструкции для Nuvera 288

Бренды по названию

Популярные бренды