Xerox DocuCentre-III C4100, Руководство пользователя

Страница: 195 / 523

Setup & Calibration
193
T
ools
5
Save In
Enter the directory for storing documents. When SMB is selected, use a UNC format.
z
Forwarding via FTP
Example: To save in the bbb directory under the aaa directory in the root directory.
aaa/bbb
z
Forwarding via SMB
Example: To save in the bbb directory under the aaa directory in a specified volume.
aaa\bbb
User Name
When a user name is required to be input by the forwarding destination server, set the user
name.
When [FTP] is selected under [Transfer Protocol], up to 32 characters are allowed.
When [SMB] is selected under [Transfer Protocol], use one of the following formats.
z
For Active Directory:
User name@Domain name (User name: up to 32 characters / Domain name: up to 64
characters)
Example: fuji@example.com (fuji: user name / example.com: domain name)
z
For Windows NT domains:
Domain name\User name (Domain name: up to 64 characters / User name: up to 32
characters)
Example: example\fuji (example: domain name / fuji: user name)
z
For workgroups:
Local user (up to 32 characters)
Example: Fuji-Taro
Password
When a password entry is prompted by the forwarding destination server, specify a
password. You can enter up to 32 characters for a password.
Port Number
Set the forwarding destination port number. Specify a number in the range from 1 to 65535.
When the [Delete Entry] Button is Selected
Selecting this button deletes all the information registered for the selected address. To delete
all the registered information, select [Delete].
Important • Deleted information cannot be recovered.
Create Fax Group Recipients
You can register addresses for broadcast transmission as a group. Each group can
include up to 20 address numbers. The maximum number of groups that can be
registered is 50.
Note that recipients to be added to a group must already be stored in the address book.
Note • It is not possible to include a group in another group.
• As shown in the following example, you can use wildcards for specifying the numbers.
- 01
∗
: Specifies the 10 addresses with address numbers 010 to 019.
-
∗∗∗
: Specifies all address numbers.