Xerox DocuCentre-III C4100 Скачать руководство пользователя страница 408

Страница: 408 / 523

14 Problem Solving

406

rob
le

m Solving

027-708

[Cause] The S/MIME certificate associated with the machine’s e-

mail address is not reliable.

[Remedy] Import a reliable S/MIME certificate to the machine.

027-709

[Cause] The S/MIME certificate associated with the machine’s e-

mail address has been discarded.

[Remedy] Import a new S/MIME certificate to the machine.

027-710

[Cause] No S/MIME certificate is attached to the received e-mail.
[Remedy] Ask the sender to send the e-mail with an S/MIME

certificate.

027-711

[Cause] No S/MIME certificate was obtained from the received e-

mail.

[Remedy] Import the sender's S/MIME certificate to the machine, or

attach an S/MIME certificate to S/MIME signature mail
sent from the sender.

027-712

[Cause] The received S/MIME certificate has expired, or is an

unreliable certificate.

[Remedy] Ask the sender to send the e-mail with a valid S/MIME

certificate.

027-713

[Cause] The received e-mail has been discarded because it might

be altered on its transmission route.

[Remedy] Tell the sender about it, and ask to send the e-mail again.

027-714

[Cause] The received e-mail has been discarded because the

address in its From field was not the same as the mail
address in the S/MIME signature mail.

[Remedy] Tell the sender that the mail addresses are not identical,

and ask to send the e-mail again.

027-715

[Cause] The received S/MIME certificate has not been registered

on the machine, or has not been set to use on the
machine.

[Remedy] Import the sender's S/MIME certificate to the machine, or

change settings to use the S/MIME certificate on the
machine when the S/MIME certificate has already been
registered.

027-716

[Cause] The received S/MIME certificate has been discarded

because the certificate was unreliable.

[Remedy] Ask the sender to send the e-mail with a reliable S/MIME

certificate.

027-720

O [Cause] Unable to find the server of an application interface

destination.

[Remedy] Check the DNS server address. Or, check whether or not

the computer that the application (ApeosWare Flow
Service) is installed on has been registered on the DNS
server.

027-721

O [Cause] An application interface destination does not exist.

[Remedy] Check whether the application linked (ApeosWare Flow

Service) operates correctly.

Error Code

Category

Cause and Remedy

C P F S M O

* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is

printed on the label or card attached on the machine.

Содержание DocuCentre-III C4100











































































































































































































































































































































































































































































































































Результаты поиска

Содержание DocuCentre-III C4100

Отзывы:

Похожие инструкции для DocuCentre-III C4100

Бренды по названию

Популярные бренды

Xerox DocuCentre-III C4100, Руководство пользователя

Результаты поиска

Содержание DocuCentre-III C4100

Отзывы:

Похожие инструкции для DocuCentre-III C4100

Бренды по названию

Популярные бренды