Xerox DocuCentre-III C4100, Руководство пользователя

Страница: 187 / 523

Setup & Calibration
185
T
ools
5
z
Resend Attempts
Set whether to try again if a transmission fails. If you select [On], also set [Resend Attempts]
and [Resend Interval (Seconds)].
- Resend Attempts
Set the transmission retry count in the range of 1 to 5.
- Resend Interval (Seconds)
Set the transmission retry interval in the range of 30 to 300 seconds.
„ Clear
Deletes all information for the selected address.
„ Enter Details
Select one of [Name], [Server], [Save in], [User Name], and [Password] and select [Enter
Details], to display an input screen.
The numbers of characters you can input are as follows.
z
Recipient Name: Up to 36 characters
z
Server: Up to 64 characters
z
Save in: Up to 128 characters
z
User Name: Up to 32 characters
z
Password: Up to 32 characters
For detail information, refer to "Create Job Flow Sheet" (P.180).
Transfer via SMB (1), Transfer via SMB (2)
Transfer via SMB (2) will appear when Transfer via SMB (1) is configured.
Specify where SMB forwarding is to be stored.
„ Address Book
When the server address is registered in Address Book, you can specify the address from
Address Book. The specified address appears in the [Transfer via SMB] screen.
For information on Address Book, refer to "Add Address Book Entry" (P.187).
„ Detailed Settings
Set the subject, output file format, encryption, and digital signature. select the item to change,
and select [Change Settings].
z
File Format
Specify an output file format.
For information on file formats, refer to "5 Scan" in the User Guide.
z
Resend Attempts
Set whether to try again if a transmission fails. If you select [On], also set [Resend Attempts]
and [Resend Interval (Seconds)].
- Resend Attempts
Set the transmission retry count in the range of 1 to 5.
- Resend Interval (Seconds)
Set the transmission retry interval in the range of 30 to 300 seconds.
„ Clear
Deletes all information for the selected addresses.
„ Enter Details
Select one of [Name], [Server], [Shared Name], [Save in], [User Name], and [Password] and
select [Enter Details], to display an input screen.
The numbers of characters you can input are as follows.
z
Name: Up to 36 characters
z
Server: Up to 64 characters