Wood-mizer LT15M2 D10, Руководство пользователя, Страница: 60 / 105

Setup & Operation
Loading, Turning, And Clamping Logs
3
3-12 15doc080213 Setup & Operation
WARNING! Always wear eye, ear, respiration, and foot protection
when operating the sawmill. Failure to do so may result in serious
injury.
CAUTION! If at any time you need to immediately stop the blade
engine, release the safety button located on the control box.
3.6 Loading, Turning, And Clamping Logs
To Load Logs
1. Move the saw carriage to the front end of the frame.
CAUTION! Before loading a log, be sure the cutting head is moved
far enough forward so the log does not hit it. Failure to do so may
result in machine damage.
2. Adjust the log clamps all the way down and move them toward the loading side of the sawmill
frame.
CAUTION! Be sure the log clamps are all the way down before
loading a log onto the bed. Failure to do so may result in machine
damage.
3. Raise the side supports on the sawmill bed to prevent the log from falling off the side of the bed.
4. Position the log at the foot of the ramps.
5. Use a cant hook to roll the log up the ramps and onto the sawmill bed. Position the log against the
side supports.
6. Remove the log ramps and set aside.
FIG. 3-10
150212
Safety Button