Wood-mizer LT15M2 D10, Руководство пользователя, Страница: 49 / 105

Setup & Operation
Sawmill Setup
Setup & Operation 15doc080213 3-1
3
SECTION 3 SETUP & OPERATION
3.1 Sawmill Setup
IMPORTANT! Before starting to use the sawmill you have to meet
the following conditions:

Set up the sawmill on firm, level ground and level the sawmill. Secure the sawmill to the
ground to prevent moving during operation. A concrete foundation or pads (rated to
support 31 T/m
2
at each sawmill foot position) and 16mm anchored bolts are
recommended.

Under roof, the sawmill should always be operated with the sawdust collection system.

The sawmill can be operated in temperature range from -15
o
C to 40
o
C only.

The illumination at the operator's position should be at least 300lx.

The sawmill operator’s position is shown below.
The LT15 sawmills are only partially aligned in factory. Some assemblies need to be aligned by a
user before first usage of the sawmill.
Assemblies aligned in factory:

Blade drive belt tension;

Engine rpm (DC only);

Blade wheels (in vertical and horizontal planes);

Blade guide arm alignment -
See Section 6.5
;

Blade guides -
See Section 6.6
;

Blade Height Scale -
See Section 6.12
;
!
150189a