2. Safety
Page 10
105204
– WTS-300-E - V4.1 - 20.01.2022
2.
Safety
2.1 General Information
The plant engineering company, the installer or the service engineer
must prepare operating instructions for the operator, taking account of
the controller's parameters as supplied.
We recommend referring only to the parameters which the end user
needs for safe operation.
In preparing the operating instructions for the end user, especially the
chapter on “Safety”, account must be taken of local regulations.
The parameter settings of the WTS-300 as supplied do not correspond
to the intended use. This can lead to undefined behaviour by individual
components when the system is commissioned.
For this reason, no actuators should be connected when starting oper-
ation. Load circuits should be separated.
The general principle is that the plant constructor is responsible for
putting the controller into operation.
IMPORTANT NOTICE ON LIABILITY
The faultless function of the WTS-300 depends on many external fac-
tors, which the manufacturer has no influence on. The manufacturer
assumes no liability for damage to the milk cooling tank, the connected
components or the milk. The integrated tank monitor thus only sup-
ports the milk quality and does not release the farmer (as operator of
the milk cooling tank) or the driver of the milk collecting truck from the
duty of care. These must ensure, before withdrawing from the tank, that
the milk is transportable.
NOTICE
WARNING
