WELBA WTS-300, Инструкция по установке и эксплуатации

Страница: 113 / 151

8. Setting of parameters
105204
– WTS-300-E - V4.1 - 20.01.2022
Page 113
Section 8.11: Level
“Configuration” (A parameters)
Scaling determination of litres via pressure sensor
See section 10.5
Range Def.
A60
Litre per cm filling height (linear area)
0..100,0 l 50,0
A61
Offset in litre
0..1000 l 500
A62 Distance sensor to the beginning of linear area 0..300 cm 0
Configuration external modules
Range Def.
A71 Configuration stirring unit monitoring
look also section 9.8
0 .. 15 0
0: deactivated
5: Clear bands
(after deleting of the bands, the number of agitators must be readjusted)
Agitator monitoring module ESVAW-001-A
Switching on of the agitator by a WTS-300 relay
1: one agitator
2: two agitators
3: three agitators
4: four agitators
Agitator monitoring module ESVAW-002-A
with two agitator switch-on-relays that are integrated in the module
6: one agitator
7: two agitators
(if not used with [A14] other functions are selectable)
Agitator monitoring without a separate module
If agitator monitoring is made via inductive agitator sensor
(max. 2 channels)
8:* one agitator
9: * two agitators
Agitator monitoring without a separate module
If agitator monitoring is made via switch contact of the WTS-300
10: * one agitator
11:* two agitators
Agitator monitoring module ESVAW-003-A
with one agitator switch-on-relay that is integrated in the module
12: One agitator 3-phases 400 V
13: Two agitators 3-phases 400V
(over second module. Note addressing)
14: One agitator 2-phases 400V
15: Two agitators 2- phases 400V
(over second module. Note addressing)
Agitator monitoring module ESVAW-004-A
(same as ESVAW-001-A)
* Precondition: Input function 35 must be assigned
to one of the digital inputs [A21..A33].
Sensor below linear area
Sensor
Linear
area
A61
A60
A62
Sensor within linear area
Sensor
linear
area
A61
A60