7. Tank monitor and general fault handling
Page 64
105204
– WTS-300-E - V4.1 - 20.01.2022
Section 7.2: Tank monitor: Milk removal YES or NO
Critical alarm -
Milk must not be taken out.
The driver goes to the WTS-300 and checks the tank monitor.
The red LED is lit or flashing, an error code blinks in the display and, depending
on the circumstances, a horn may sound.
The driver informs the farmer -> Farmer and driver investigate the cause of the
critical alarm. (The critical alarm codes are taken from the display and identified
using the fault table. See section 8.10)
The farmer and driver then decide together whether the milk can be transferred
to the tanker, despite the alarm.
The farmer presses the RESET button to cancel the alarm -> The warn horn
mute.
The farmer presses the RESET button again -> the red LED is lit continuously.
Once the tank is emptied the washing process must be started
It is only when the cleaning cycle is active for at least 10 minutes that the tank
monitor resets all critical alarms.
Green = off
Red = flashing
critical alarm
(press RESET button)
after RESET
Green = off
Red = on
critical alarm