manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 95 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 95

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

93 / 134

ELAC LAZ 5200 –  Operating Instructions

Operation

Setting the network mask of the Navigation Echo Sounder ELAC LAZ 5200

Precondition:

The "NETWORK" menu is unlocked 

6.5.4.4.

6.5.11.3

Configuring the Network Settings of the Printer

Setting the IP address of the printer

Precondition:

The "NETWORK" menu is unlocked 

6.5.4.4.

Proceed as follows to set the network 
mask:

1. Select menu item 

MAIN MENU > NET-

WORK > Mask

.

2. Press the 

[ENTER]

 key.

3. Set the digits of the network mask in 

turn using the 

[CURSOR]

 keys (up or 

down) and confirm each with the 

[EN-

TER]

 key.

–

After setting the last digit and 
pressing the 

[ENTER]

 key, the set 

network mask is saved.

4. Reboot the device 

6.5.3.

Fig. 6.63: Setting the Network Mask

Changes to the network settings are only active after a reboot of the device.

Proceed as follows to set the IP address:

1. Select menu item 

MAIN MENU > NET-

WORK > IP

.

2. Press the 

[ENTER]

 key.

3. Set the digits of the IP address in turn 

using the 

[CURSOR]

 keys (up or down) 

and confirm each with the 

[ENTER]

 

key.
–

After setting the last digit and 
pressing the 

[ENTER]

 key, the set 

IP address is saved.

4. Reboot the device 

6.5.3.

Fig. 6.64: Setting the IP Address

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов