manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 23 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 23

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

21 / 134

ELAC LAZ 5200 –  Operating Instructions

Safety

2

Safety

2.1

Preliminary Remark on Chapter "Safety"

Products from 

Wärtsilä ELAC Nautik GmbH

 satisfy a high standard of safety. They are 

manufactured in accordance with the state of the art and the recognised technical safety 
regulations.

Nevertheless, improper use of the product or use for other than the intended purpose can 
result in dangers, equipment damage or damage to the environment.  

This chapter contains safety-relevant information to help prevent any such dangers.

The safety precautions are structured in a defined manner. See also section 

1.6 

"Representation Conventions"

2.2

Intended Use

The 

Navigation Echo Sounder ELAC LAZ 5200

 is designed for electro-acoustic vertical 

range measurement under water. The distance between the installation location of the 
transducer and the sea bed is measured, and hence the depth under keel calculated.

The intended use also entails:
•

Use of the product in accordance with the instructions in the system and/or device 
documentation.

•

Compliance with the operating, service and maintenance instructions given by the 
manufacturer.

2.3

Foreseeable Misuse

It is not permitted to use the 

Navigation Echo Sounder ELAC LAZ 5200

 for the following 

purposes.

The 

Navigation Echo Sounder ELAC LAZ 5200

 must not

•

be used to disturb or scare away marine species;

•

be used in the immediate vicinity of divers or swimmers (particular care must be taken 
in port areas and beach regions!);

•

be used to interfere with other hydro-acoustic systems (e.g. active and passive sonar 
systems, navigation echo sounders, measuring systems, underwater telephone sys-
tems);

•

only be operated in the defined system configuration;

•

operated and/or serviced by unqualified personnel.

This system may only be installed and operated in accordance with the operating con-
ditions stipulated in the corresponding system and/or device documentation.

Any other or further use does not constitute an intended use. The manufacturer accepts 
no liability for any resulting damage; the risks associated with improper use must be 
borne solely by the operator.

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов