manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 24 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 24

ELAC LAZ 5200 – Operating Instructions

Safety

22 / 134

Wärtsilä ELAC Nautik GmbH 

TH 52 614 8001 EN Rev. A 09/2018

R

efer to pr

otection

 notice ISO 16016

2.4

Personal Protective Equipment

Personal protective equipment (PPE) must be worn during all work and activities which, 
due to their nature, could lead to injuries and health impairment and which cannot be pre-
vented by other measures (technical or organisational).

Personal protective equipment is any device or means intended to be worn or carried by 
a person in order to protect this person against a risk or several risks which could endan-
ger the person's health or safety.

Personal protective equipment (PPE) must meet the requirements of the laws and regu-
lations applicable at the place of work.

2.5

System Damage due to Unauthorised Modification

WARNING!

System damage due to unauthorised modification 

Modifications and changes to the product or system can result in incalculable risks and 
dangers for life and limb.

Only modifications and changes authorised by the manufacturer may be made to the 
product or system. Unauthorised modifications are the sole responsibility of the own-
er and void all liability on the part of the manufacturer.

This includes also changes to any hardware or software belonging to the system. 

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов