manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 112 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 112

ELAC LAZ 5200 – Operating Instructions

Preventive Maintenance

110 / 134

Wärtsilä ELAC Nautik GmbH 

TH 52 614 8001 EN Rev. A 09/2018

R

efer to pr

otection

 notice ISO 16016

8.4.2

Cleaning the Transducer

1. Make the transducer radiation surface accessible.

2. Carefully remove fouling from the transducer radiation surface using suitable clean-

ing aids.

2.1.

Carefully remove coarse fouling using a plastic spatula. Move the spatula at 
an oblique angle over the transducer radiation surface in order not to cause 
scores.

2.2.

Carefully remove the remaining fouling using a suitable cleaning tool (e.g. 
sponge, brush). Clean the surface in a circular motion and do not apply more 
pressure than necessary.

3. Inspect the transducer radiation surface visually for damage after cleaning.

Logistic Information

Component

Transducer

Interval

if necessary

Operator

On-board maintenance personnel

Measure

Cleaning / inspection

Duration

0,5 h

special tools/test-
ing instrument/
tools

•

Plastic spatula (---)

•

Suitable cleaning tools (sponge, brush) (---)

The possible fouling (e.g. algae, crustaceans, mussels, barnacles) depends on the type 
of ship, operational intensity and the channel travelled and varies with fresh and salt wa-
ter, according to the lay and travel times, water temperature and solar irradiation.

NOTICE

Damage to the transducer possible!

The surface of the transducer is delicate and can be easily damaged.

Do not use high-pressure or steam cleaners, metallic objects or solvent-based 
cleaning additives for cleaning.

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов