WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 83

Страница: 83 / 136

efer to pr

otection

notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH

81 / 134

ELAC LAZ 5200 – Operating Instructions

Operation

6.5.6.3

Activation of the Test Alarm

The test alarm simulates a shallow water alarm for a duration of one second. When the
test alarm is triggered, an acoustic alarm sounds and the alarm is displayed in the status
bar of the

Navigation Echo Sounder ELAC LAZ 5200

and on all the interfaces (NMEA

and relay). If the real alarm state changes during the test, the test alarm is automatically
aborted.

Activating the test alarm

Proceed as follows to activate the test
alarm:

1. Open the menu



6.5.4.

2. Select menu item

MAIN MENU >

ALARM SETUP > Test



of the re-

spective alarm.

3. Press the

[ENTER]

key.

–

The warning "TEST ALARM" is dis-
played.

4. Select “Yes” using the

[CURSOR]

keys

(up or down).

5. Press the

[ENTER]

key to confirm the

selection.
–

The shallow water alarm is trig-
gered for a duration of one second.

Fig. 6.47: Activating the Test Alarm

Fig. 6.48: Activating the Test Alarm







Содержание ELAC LAZ 5200









































































































































Результаты поиска

Содержание ELAC LAZ 5200

Отзывы:

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 83 / 136

Результаты поиска

Содержание ELAC LAZ 5200

Отзывы: