manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 38 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 38

ELAC LAZ 5200 – Operating Instructions

Installation

36 / 134

Wärtsilä ELAC Nautik GmbH 

TH 52 614 8001 EN Rev. A 09/2018

R

efer to pr

otection

 notice ISO 16016

CAUTION!

Risk of injury

Risk of injury and crushing. Pay attention to the weight when handling and transporting 
the components. Information on weights can be found in section 

3.4 "Technical Data 

– Navigation Echo Sounder ELAC LAZ 5200"and/or the further applicable documenta-
tion (

9.1 "Applicable Documents").

Use suitable lifting gear and load lifting appliance!

Pay attention to the centre of gravity!

Do not stand or walk under raised loads!

Use suitable personal protective equipment!

NOTICE

Electrostatically sensitive devices!

Possible destruction of components by electrostatic discharge!

Take the appropriate ESD measures!

NOTICE

Corrosion damage possible

All components must be included in the ship's anodic corrosion protection system.

The design of the corrosion protection system (e.g. positioning and design of the 
sacrificial anodes) must be carried out by the shipyard.

NOTICE

Damage to the transducers possible

Improper handling of the transducers during installation can result in material damage. 

Avoid collisions with the transducer housing.

Avoid collisions with the transducer transmitting surface and avoid damage caused 
by scratches.

Ensure that all parts of the transducers remain free from oil and grease.

Do not coat the transducer transmitting surface with paints or lacquers or cover in 
any other way (adhesive tape. etc.).

Damage to the antifouling coating must be repaired in accordance with the manu-
facturer’s instructions.

NOTICE

Damage to the transducer cables possible

Improper handling of the transducer cables can result in damage. 

Do not lift or transport the transducers at the cable.

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов