manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 89 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 89

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

87 / 134

ELAC LAZ 5200 –  Operating Instructions

Operation

6.5.8.1

Opening the History

6.5.8.2

Scrolling in the History

The history can only be opened when no depth alarm is active. In the event of an active 
depth alarm, the history is automatically closed.

Proceed as follows to open the history:

1. Open the menu 

6.5.4.1.

2. Navigate to menu item 

MAIN MENU > 

Replay

.

3. Press the 

[ENTER]

 key to confirm the 

selection.
–

The history is opened. The mes-
sage "REPLAY"

 is displayed in 

the status bar.

Fig. 6.54: Opening the History

Fig. 6.55: “REPLAY” Message

When the history is opened, the stored data needs a few seconds to load. During this 
loading time, the display area remains black. The message "Loading replay data…" is 
displayed in the lower part of the display area.

Proceed as follows to scroll in the history:

1. To display older data, press the 

[CUR-

SOR]

 key (down).

–

The screen capture is scrolled to 
the right.

2. To display newer data, press the 

[CUR-

SOR]

 key (up).

–

The screen capture is scrolled to 
the left.

Fig. 6.56: Scrolling in the History

CURSOR

The 

[RANGE]

 keys allow the depth measuring range in the history to be modified. 

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов