manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 128 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 128

ELAC LAZ 5200 – Operating Instructions

Appendix

126 / 134

Wärtsilä ELAC Nautik GmbH 

TH 52 614 8001 EN Rev. A 09/2018

R

efer to pr

otection

 notice ISO 16016

9.3.8

DPT (Depth)

DPT is an NMEA data set that indicates the water depth. The indicated water depth de-
pends on the distance between the transducer and the keel. The data set is only trans-
mitted by the 

Navigation Echo Sounder ELAC LAZ 5200

.

The NMEA data set contains the following information:

Fig. 9.10: DPT (Depth)

Item

Description

Water depth in metres

Distance between transducer and keel in metres

Depth measuring range in metres

Tab. 9.12: DPT (Depth)

$SDDPT,x.x,-x.x,xx,*hh<CR><LF>

  

If only a non-approved transducer is used (NON-IMO mode 

6.3.2.4), the depth infor-

mation is not included in data set DPT as the depth value cannot be marked as invalid 
in the data set. If NON-IMO mode is active, the data set PELACSDS 

9.3.12 can be 

used, as this data set provides a depth value even with non-approved transducers.

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов