Vodavi Starplus Triad 1, Руководство по системному программированию

Страница: 254 / 456

Page B Introduction 4-31
2. Enter a valid number (0–6) to correspond to the LCR Class of Service
desired.
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Description
Stations can be given a class of service assignment for Least Cost Routing.
The range is between 0-6, with 0 being unrestricted and 6 the most
restricted. A station can use LCR routes with a priority number equal to or
higher than the stations LCR COS assignment. Stations are given
unrestricted access (0).
Off-Hook Preference
Programming Steps
1. Press the OFF-HOOK PREF flexible button (FLASH 50, Page B,
Button #10)
. The following message displays:
2. Enter a valid button number (01–24) or (00) to indicate no specific
button is preferred. (SLTs use [01] to enable or [00] to disable.)
3. Enter a 0 or 1 to disable/enable the Off-Hook Preference as follows:
[0]= Disables programmable preference so users may not change the
off-hook preference as set in programming. Also use for SLT stations.
[1]= Enables programmable preference to key station users so that
they may change the off-hook preference through a user dial code.
4. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Description
The Off-Hook Preference feature lets a key station user automatically
have a flex button selected when going off-hook or pressing the ON/OFF
button. An SLT user may have a particular CO line or a CO line group
selected automatically when going off-hook. This may be established in
programming so that key station users can select and/or change their off-
hook preference through the use of a dial code [691]+BB (01-24).
OFF H OOK PR EF EN CE BT N X XY
00 D IS AB LED