Vodavi Starplus Triad 1, Руководство по системному программированию, Страница: 25 / 456

1-4 Introduction
The system database is updated on a real-time basis as new data is
entered, by pressing the Hold button. The system continues to operate
with the current database and is updated with any newly entered or
changed data without interruption to telephone operation or call
processing in progress. However, if for example a station’s attributes are
changed while that station is off-hook on an active call, the newly
entered data does not take effect until the station goes on-hook or
becomes idle.
When using a PC to program the system, the following chart presents the
data terminal characters that are equivalent to the key set buttons.
Figure 1-1: Data Terminal Program Codes Cross Reference
Some features must have more than one data field programmed for
that feature to work. This information is stated in the instructions.
adm>
REMOTE ADMIN KEY DEFINITION
Keyset Term Keyset Term Keyset Term
---------------------------------------------
0 0 FLEX 1 Q FLEX 13 D
1 1 FLEX 2 W FLEX 14 F
2 2 FLEX 3 E FLEX 15 G
3 3 FLEX 4 R FLEX 16 H
4 4 FLEX 5 T FLEX 17 J
5 5 FLEX 6 Y FLEX 18 K
6 6 FLEX 7 U FLEX 19 L
7 7 FLEX 8 I FLEX 20 :
8 8 FLEX 9 O FLEX 21 Z
9 9 FLEX 10 P FLEX 22 X
* * FLEX 11 A FLEX 23 C
# # FLEX 12 S FLEX 24 V
TRANS B MUTE N ON-OFF M
FLASH ‘ HOLD CR
adm>
;