3-48
Direct Inward Dialing (DID) Programming
The top left button (ROUTE) in the flexible button field is lit for
programming the Route number. The LEDs for the UP Button
(FLASH 44,
Button #18)
, the DOWN Button
(FLASH 44, Button #19)
is also lit.
Changing to a Different DID Route Number
1. Press either the UP Button
(FLASH 44, Button #18)
,
-or-
Press the DOWN Button
(FLASH 44, Button #19)
.
2. Enter a valid Route Number (000-499) to be associated with the DID
Number.
This Route Number is the same Route Number in the ICLID Ringing
Assignments Table
(FLASH 43)
and determines the destination of the
DID number associated with this Route Number. The display shows
the route number as it is entered.
3. Press the HOLD button to save the entry. A confirmation tone is
heard.
Description
DID calls are treated as an incoming call and follow the same rules
established for CO lines. DID information transferred from the network is
captured and translated to direct a specific DID number to a specific
station, ACD or Hunt group of stations, or Voice Mail group. The DID call
appears at the destination station under an assigned LOOP or CO button.
When receiving a DID call, the destination station hears the CO line
ringing and the assigned CO or LOOP button flashes at the incoming CO
line flash rate. The destination station then presses the flashing CO or
LOOP button, is connected to the incoming DID call, and CO line ringing
stops and the LED for the CO or LOOP button lights steady.
If the outside caller disconnects from a two-party conversation, the
Central Office opens the loop and returns the line to idle state. The
Triad
1/2/3
Digital Systems detects the disconnect signal, release the line, and
provides a busy tone to the keyset/SLT (unless the SLT is a VM port), and
disconnects from the DID line. If the extension called hangs up the
phone, the central office detects disconnects, and returns the line to the
idle state.
Содержание Starplus Triad 1
