VIPA 300S SPEED7 - CP, Руководство пользователя

Страница: 77 / 94

Manual VIPA System 300S SPEED7
Chapter 4 Deployment
HB140E - CP - RE_342-1CA70 - Rev. 09/46 4-39
Index Sub-
index Name Type Attr. Map. Default value Meaning
0x2200 0x00 Number of
elements
Unsigned8 ro N 16 Number of available
entries
0x01 1. PGN Unsigned8 rw N 0 PGN
... ... ... ... ... ... ...
0x10 16. PGN Unsigned8 rw N 0 PGN
This is a index for the J1939 protocol.
Larger data sets were transferred by the multi package protocol of the
J1939 protocol. Here the COB-IDs 20ECFF00h and 20EBFF00h were
used.
The PNG number and the data length is transferred by the COB-ID
20ECFF00h. The data are segmented transferred by the COB-ID
20EBFF00h. In the configuration tool WinCoCT the PLC parameter
"Manufacturer Alarm (OB 57)" is to be activated and the "Number of
messages" is to be set to 1 for the correct work with the data. Furthermore
the COB-IDs 20ECFF00h and 20EBFF00h are to be entered in the Index
2000h.
The number of PLC OB 57 calls may be limited now by the index 0x2200. A
OB 57 call is only generated by the data telegrams of the PGN numbers
entered here.
Index Sub-
index Name Type Attr. Map. Default value Meaning
0x3000 0x00 Special Settings
for CAN
Unsigned8 rw N 0 Special Settings for
CAN
Special functions of the CAN firmware may be adjusted by this index.
Bit 0:
The RxPDO- length check may be deactivated
Bit = 0: Length check is activated
Bit = 1: Length check is deactivated
Bit 6...1:
reserved
Bit 7:
special bit for J1939
Bit = 0: The priority of the J1939 COB-IDs is checked
Bit = 1: The priority of the J1939 COB-IDs is not checked
J1939: PGN for
Multipaket
Transfer
Special Settings
for CAN