VIPA 300S SPEED7 - CP, Руководство пользователя

Страница: 49 / 94

Manual VIPA System 300S SPEED7
Chapter 4 Deployment
HB140E - CP - RE_342-1CA70 - Rev. 09/46 4-11
•
Start the Siemens SIMATC Manager with a new project. Open the
hardware configurator and insert a profile rail from the hardware catalog.
•
Place the following Siemens CPU at slot 2:
CPU 318-2DP (6ES7 318-2AJ00-0AB0/V3.0)
•
Open the wld file by using
File
>
Memory Card File > open
•
Copy the DB 2xxx into your DB directory
As soon as you transfer this block to your SPEED7-CPU, it is recognized
by the CPU and the according parameters are transferred to the wanted
CAN master.
This is only possible when the CAN master module is included into the
hardware configuration at the SPEED-Bus. The following pages show the
according approach.
The modules at the right side of the CPU at the standard bus are
configured with the following approach:
•
Start the hardware configurator from Siemens with a new project and
insert a profile rail from the hardware catalog.
•
Place the following Siemens CPU at slot 2:
CPU 318-2DP (6ES7 318-2AJ00-0AB0/V3.0)
•
Include your System 300V modules at the standard bus in the plugged
sequence starting with slot 4.
•
Parameterize the CPU res. the modules where appropriate. The
parameter window opens by a double click on the according module.
•
To extend the bus you may use the IM 360 from Siemens where you
can connect up to 3 further extension racks via the IM 361. Bus
extensions are always placed at slot 3.
•
Save your project
Standard bus (serial) SPEED-Bus (parallel)
CPU 31xS
DI DO
CAN-Master
DI DO DIO AI AO
Module
CPU 318-2
DP
MPI/DP
DI
DO
DIO
AI
AO
Standard bus
Slot
1
2
X2
X1
3
4
5
6
7
8
AI DIO
Import to PLC-
Program
Project
engineering of the
modules at the
standard bus