VIPA 300S SPEED7 - CP, Руководство пользователя

Страница: 35 / 94

Manual VIPA System 300S SPEED7
Chapter 3 Hardware description
HB140E - CP - RE_342-1CA70 - Rev. 09/46 3-3
Structure
[1] LED status indicators
The following components are
under the front flap
VIPA 342-1CA70
CP 342S-CAN
X 2
3 4
RUN
ERR
BA
IF
1
CAN
2
[2] CAN interface
The CP 342S-CAN carries a number of LEDs that are available for
diagnostic purposes on the bus and for displaying the local status.
Dependent on the mode of operation these give information according to
the following pattern over the operating condition of the CP:
Master operation
RUN
green
ERR
red
BA
yellow
IF
red
Meaning
○ ○ ○ ○ Master has no project, this means the
interface is deactivated.
☼ ☼ ☼
○ Master is waiting for valid parameters from
the CPU.
● ○ ● ○ CPU is still in RUN.
Master is in "operational" state, this means
data exchange between master and slaves.
Inputs may be read and outputs may be
accessed.
● ○
☼
○ CPU is still in RUN.
Master is in "pre-operational" state. The
inputs are undefined and the outputs are
disabled.
○ ● ○ ○ CPU is in STOP.
At least 1 slave is missing.
○ ● ○ ● CPU is in STOP.
Master shows initialization error at faulty
parameterization.
Front view
Components
LEDs