Videonics AB-1 Edit Suite страница 27 Скачать руководство пользователя | Manualshive

Страница: 27 / 151

background image

attached, remove it and try again. If one is not attached, add one and try
again.

• If you get an error message (LTC NOT FOUND or VITC NOT FOUND),

you specified LTC or VITC as the time-code type, but Edit Suite could not
find the time code on your tape.

- Advance to a different portion of the tape and try again, or try a different
tape.

- Verify that TCSRC=INT is selected if time code is sent through the Edit
Control Cable (most RS-232 and RS-422 VCRs only), or that TCSRC=EXT
is selected if the time code is sent by an audio or video cable attached to
the Time Code IN port.

- If the VCR can send multiple types of time code, ensure the correct type
is being sent.

- If the above do not work, change the configuration settings for this port
to TCSRC=INT and TC=NONE to see if Edit Suite can read the Real Time
Counter for the VCR.

• If the VCR does not go into PLAY or if the time code displays as **:**:**.**,

first verify that the control cable is attached to the correct port and VCR,
that power is applied to the VCR, and that there is a tape with video in the
VCR.

- Next verify that the PROTO, VCR, TCSRC, and TC fields are set
correctly. If not, correct them and try again.

• For all VCRs, if you selected VITC, LTC or RCTC time code, change your

settings to TCSRC=INT and TC=NONE to see if Edit Suite can control
your VCR with the Real Time Counter.

• Check Appendix A for additional VCR table numbers and try one of them.
• If the Time Code displays as 00:00:00.00 and does not move, you probably

have RCTC selected but no time code on the tape. Verify if the RCTC
exists on the tape. If not, use the VCR's PLAY WRITE function to add the
RCTC to the tape.

• Some VCRs—like the Sanyo GVR-S955—require a special cable. Refer to

Appendix B for the cable pinout requirements.

10. Creating, Previewing and Recording an A/A Roll

• All of the configuration information you entered earlier and the scenes

you are about to create are saved as soon as they are entered, so you can
take a break at any time, remove power from Edit Suite [if necessary],
then reapply power and resume where you left off.

«
...
25
26
27
28
29
...
»

Содержание AB-1 Edit Suite
























































































































































Отзывы:

Нет отзывов

Похожие инструкции для AB-1 Edit Suite

Бренд: Adobe Страницы: 822

ZENworks 7.2 Linux Management

Бренд: Novell Страницы: 10

Network Shutdown Module V3

Бренд: Eaton Страницы: 65

LINUX ENTERPRISE DESKTOP 11 - KDE

Бренд: Novell Страницы: 102

Бренд: Alcatel Страницы: 2

VCENTER CHARGEBACK 1.5 - API

Бренд: VMware Страницы: 150

Бренд: Novation Страницы: 93

Бренд: Alcatel Страницы: 4

DATA SYNCHRONIZER - UPDATE 1

Бренд: Novell Страницы: 9

ANTI-VIRUS LINUX CLIENT SECURITY -

Бренд: F-SECURE Страницы: 208

Бренд: TruCluster Страницы: 88

CLUSTER SUITE FOR ENTERPRISE LINUX 4.5

Бренд: Red Hat Страницы: 110

VANTAGE CNM 2.0 -

Бренд: ZyXEL Communications Страницы: 346

Auto Configuration Server Vantage Access

Бренд: ZyXEL Communications Страницы: 113

BRIGHTMAIL GATEWAY SMALL BUSINESS EDITION

Бренд: Symantec Страницы: 4

Бренд: Symantec Страницы: 30

Бренд: AMX Страницы: 53

507B1-90A211-1301 - NavisWorks Manage 2010

Бренд: Autodesk Страницы: 472

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды