Videonics AB-1 Edit Suite, Руководство пользователя

Страница: 107 / 151

13 EDL empty
The last remaining event in the EDL was deleted.
This is an advisory message only. After pressing [OK] to clear the
message, the NEW menu displays.
14 EDL corrupt
After a [CUT] or a [SHIFT]+[CUT], the EDL was found to be
unusable.
The entire EDL will need to be deleted. Use the Setup/EDL function
to delete it. If you have a copy of the EDL stored on a PC, use the
Setup/Import function to restore the EDL.
15 VCR table too large
An attempt to add a VCR table using the NEWVCR function was
made, but there is not enough memory left in Edit Suite to add the
table.
Any single table you have been provided is small enough to fit in
memory; however, if you have added other tables via the NEWVCR
function, the combination may exceed memory limits. The only way
to make room for the new table is to delete the existing tables. To do
this, you must fully reset your unit which will delete all EDL and
configuration data. If you need to do this, unplug Edit Suite, then
press and hold [SHIFT]+ [ALL STOP] while reconnecting power to
Edit Suite.
16 No valid group found
[SHIFT]+[AUTO REC] was pressed, but there are no events in the
EDL.
Clear the message. The NEW menu displays. If you were attempting
to do an assemble edit, press [REC] only instead of [SHIFT]+[AUTO
REC].