![background image](http://html1.mh-extra.com/html/ves/elite-rs-h-series/elite-rs-h-series_installation-manual_1008675062.webp)
Front-Panel Menu 4
VES, LLC
Elite-RS Panel Installation Manual
VF3529-00, Revision E01.03
H-Series
52 of 146
Include Pull Stations Yes – No (Default = No)
When selected to the ON position, all manual pull stations will also be included in the Test Mode for the zone. The
normal use of this facility is to set the Include Pull Stations to No and test all smoke detection devices in the zone. At
this stage, all manual pull stations will still operate and will take the panel out of test mode. When all devices in the
zone have been tested, then the zone is put into test, including manual pull stations.
All manual pull stations can then be tested and will operate the test mode when a zone (or zones) has been set to test
mode, then a 15 minute timer is started. This timer will decrement and after 15 minutes the zone will be automatically
taken out of test mode. Whenever a device is activated in the zone in test, the timer will automatically be reset to
15 minutes.
Set System Time
This menu option sets the panel date and time. Set the system time to log events in the event log.
Control panel changes performed in 2010 provide automatic compensation for daylight saving time.
Sensor Maintenance Early Warning
This option provides contamination status for Loop 1 and 2.
Events and Status
This section describes events and the status of the front-panel display while operating the Elite-RS Panel.
The following events are described:
•
Fire Event
•
Trouble Event
•
Pre Alarm Event