Addressable Manual
Call Point
I-9202
Features and Benefits
1. Compatible with latest EN standards
2. Re-settable (non-breaking glass)
3. Additional volt free contact
4. Electronically addressed (by P-9910B)
5. Simple installation and test
Description
Designed for the purpose of raising an alarm
manually once verification of a fire or
emergency condition exists, by pressing the
non breakable glass. Meets the standard
requirement of EN 54 part 11, European
Standard and approved by Loss Prevention
Certificate Board (LCPB).
The I-9202 constructed of high impact red
ABS with a modern pleasing appearance.
The terminating back box enables first fix
installation and termination leaving the fascia
with integral electronics to be simply plugged
into base at the time of commissioning. Non
breakable glass that can be reset with the
GST standard reset key.
The I-9202 operated via a micro-switch that
when pressed a signal will be transmitted
and the volt free contact will be latched.
Contain integral LED indicator to denote
operational mode.
Electronic addressing can be done through
Handheld Programming device (P-9910B),
purchased separately.
Technical Specifications
Standard: EN54-part 11
Protection rating: IP 40
Operating voltage: 24Vdc Loop
Operating current:
Standby current 0.8mA
Alarm Current 2mA
Operating temperature: -10°C to
+50°C
N/O Output contact: 60Vdc, 0.1A
Contact resistance: 100m
Ω
Relative humidity: 95%
Application: Indoor use
Visual Indicator: LED, Red ( lit
steady when alarm, 3 sec interval
blinking at normal state)
Material and colour: ABS, red
Wiring: 1 pair non polarized
Dimensions: 97x100x45.5mm
Mounting Base
The location of manual call point should be
installed in compliance with all local codes
and / or NFPA 72 National Fire Alarm Code,
NFPA 70 National Electrical Code.
Installed
onto
a
standard
one
gang
electrical box.
