![VES Elite-RS H-Series Скачать руководство пользователя страница 66](http://html1.mh-extra.com/html/ves/elite-rs-h-series/elite-rs-h-series_installation-manual_1008675066.webp)
Maintenance and Repair 5
VES, LLC
Elite-RS Panel Installation Manual
VF3529-00, Revision E01.03
H-Series
56 of 146
This section provides procedures to maintain and repair the Elite-RS Panel.
Reference Appendix B, “Equipment List” for component-part-numbers described in this section.
Maintenance
Perform the following procedures to maintain operation of the Elite-RS Panel.
Inspecting Batteries
Inspect the standby-batteries annually to determine the connection integrity to the power supply and to confirm the
voltage capacity available for operating the Elite-RS Panel during power failures.
Replacing Standby-Batteries
Replace standby-batteries when the service period reaches 3 to 5 years. Specify replacement batteries that are
sealed-lead-acid and that are UL recognized.
Removing the Standby-Batteries
To remove the existing standby-batteries:
1
Disconnect the jumper-cable connection between Battery 1 and Battery 2.
2
Disconnect the red-cable from the positive Terminal of Battery 1.
3
Disconnect the black-cable from the negative Terminal of Battery 2.
4
Remove Battery 1 and Battery 2 from the bottom of the Elite-RS cabinet.
5
Re-cycle Battery 1 and Battery 2 according to the manufacturer procedures provided in the packaging of the
batteries.
Section 5
Maintenance and Repair